Making a Standard Solution Flashcards

1️⃣ Familiarise yourself with the flashcards:

  • Look through all the flashcards to see what's on both sides.
  • Make sure you understand the information on each card. If something's unclear, click the link to the revision notes at the bottom of the page for more details.

2️⃣ Test yourself:

  • Look at the question or prompt on each card and try to remember the answer before flipping it over.
  • Check the answer and make a note of any cards you find challenging and need to go over more.

3️⃣ Consistently Review and Practice:

  • Use spaced repetition: spend more time on the cards you struggle with and go over them more often.
  • Regularly review all the flashcards to help you better understand and retain the information over time.

Note: We may include questions that have multiple correct answers. It's useful to remember specific examples to understand these concepts better.

PERSONALISED 1-TO-1 TUTORING

Need more help on this topic? Get 1-to-1 support

Get support with clear explanations, practice and feedback (Ages 5 to 16).

  • DBS-checked tutors
  • Flexible times
  • Parents can be updated

Want an ad-free experience? Subscribe to remove ads

What is a standard solution?

A standard solution is a solution with a known and exact concentration.

Why do chemists make a standard solution?

Chemists make a standard solution so they know the exact amount of solute in a given volume, for use in other experiments such as titrations.

Which piece of glassware is used to make an accurate volume when preparing a standard solution?

A volumetric flask is used to make an accurate volume when preparing a standard solution.

Why do you use a balance when making a standard solution?

You use a balance to measure an accurate mass of solid solute to dissolve in the solution.

Why is the solid first dissolved in a small volume of water in a beaker?

The solid is first dissolved in a small volume of water in a beaker so it can fully dissolve before being transferred to the volumetric flask.

Why do you rinse the beaker, funnel and stirring rod into the volumetric flask?

You rinse them to make sure all of the dissolved solute is washed into the volumetric flask, so none is left behind.

Why is distilled or deionised water used to make a standard solution instead of tap water?

Distilled or deionised water is used because it does not contain extra dissolved ions that could change the concentration.

How do you know when to stop adding water to a volumetric flask?

You stop when the bottom of the meniscus just touches the calibration line on the neck of the volumetric flask at eye level.

Why must you read the meniscus at eye level when making up a standard solution?

You read the meniscus at eye level to avoid parallax error, which would give the wrong volume and wrong concentration.

What should you do after stoppering the volumetric flask containing your solution?

You should invert and shake the volumetric flask several times to mix the solution evenly so the concentration is the same throughout.

What happens if you accidentally fill the volumetric flask past the mark?

If you fill past the mark, the volume is too large and the solution will be too dilute, so the concentration is no longer correct.

Why is accuracy important when making a standard solution?

Accuracy is important because any error in mass or volume will change the concentration, which can lead to incorrect results in later experiments.